Doors
To ensure
that doors can open after installation, test
by placing a floor panel on top of the underlay.
If necessary, remove the doors and trim the
bottom edges as required. The bottom of the
door frames must be cut away. Use a piece
of panel as height measure and guide for the
saw by making a cut on the frame. Make sure
that the flooring panel and underlay fit under
the cut.
Irregular
Wall
Lay the first row of panels along the
wall, do not glue them. If the wall is not
straight, trace the irregularities onto the
panel by running a pencil with a block as
a guide along the wall. Cut along the marked
line. Remember to place spacers between the
wall and the panels as provision for expansion
(8-10mm).
